@Grizz The 270z will be the successor to the 250z. It has a walnut stock- it looks like a Remington firearm. Check it out online....

Really liking it alot. It is extremely accurate and powerful. This is my first PCP but I have been into springers/gas piston guns for over 25 years. It is a pretty easy learning curve. Hope to hear...

Can't get one out of stock

@Driver Dan Barra brand. The Bowie

@trybenjaminowen 250Z stomps 1100z

when i first got the gun didnt matter what bbs i used it would only shoot 10 -7 -5 bbs at a tme then pull the clip out let the 5 bbs fall out put the clip back in same thing over and over and over ...

Hello, I have removed the buffer tube and trying to make adjustments to the hammer spring,it doesn't seem to effect the fps? I just increased the reg pressure to approx 2350 PSI and even when I lo...

HelloEveryone, What grain slug and reg pressure (PSI) for the 250Z are you all having best success with and is anyone shooting fairly tight groups at 100 yards? Thanks in advance. r/ John

I'm waiting for the 350z

250z vs 1100z gen 2 any comments?

You have entered a great new world of fun.  There is lots to learn. This forum has few participants to give you much help.  There are many great videos made by good folks that will guide ...

Update:  I'm going to try Fitz Gun and Knife Wax.  This is cheaper then Renaissance brand museum grade protectant.

Nothing original here, but since they fly out the top the ejection can be controlled.  In the wild however, even good ejection control is very difficult.  We are talking about the Barra 1...

This is disturbing. Not sure how that could happen but....this gun uses two cylinders.  You should still have one cyclinder functional at the rear of the stock.  Fewer shots but same powe...

Not sure what your question is....put the "dot" on whatever you want to hit.  Then move the alignments up or down, right or left until you feel happy.

@Miles E Crawford  I know this post is from last year, just wondering what you decided on.  I have the .25 cal. I'm killing squirrels from 25 to 75 yards with 33 gr domed pellets. Haven...

Hi,   I build a 200+ Round Magazine with lower Profile. Check it Out at:   https://www.thingiverse.com/thing:7269589/files

Hi,   There are alot of Videos about dissasembling V2 gearboxes.  I think that should help: https://youtu.be/wRysp0hI--Q?si=XK5dWIEj0GzfFhUU https://youtu.be/-CH0enjjQ_c?si=iDQCqfkAW...

Any word on when we expect the out of stocks to be back in stock

Thanks for the zero responses. Appreciate you all.