250z .22（符合加拿大标准）- 棕褐色

PCP stands for pre-charged pneumatic. A PCP rifle runs on high-pressure air stored in an onboard reservoir that you fill before shooting, not on a spring or CO2. The 250z is a bolt-action, regulated PCP with a 322cc reservoir built around the barrel that fills to a maximum of 3,625 psi.

The 250z comes in .22 (5.5 mm) and .25 (6.35 mm). Barra's manual rates it at up to 1,000 fps in .22 and up to 900 fps in .25. The Canada Compliant versions are rated at up to 500 fps.

The rotary magazine holds 10 pellets in .22 and 9 pellets in .25. Every 250z comes with two rotary magazines plus a single-shot tray. Before you load, make sure the magazine caliber matches your barrel.

Fit the included fill probe to the socket coupler of your hand pump or high-pressure tank (your charging equipment must have a pressure gauge). Insert the probe into the clean fill port and fill slowly, to no more than 3,625 psi. Then bleed all the air from the fill hose and remove the probe. Use only compressed air, never another gas such as oxygen.

Barra's manual says the 250z is best stored with the reservoir pressure below your regulator's output pressure. That keeps the seals pressed against their sealing surfaces and saves some air for your next session. If you need to empty it completely, for example before cleaning the barrel or lowering the regulator setting, follow the depressurizing steps in the manual.

Yes. The externally adjustable regulator raises output when you turn its screw counterclockwise; to lower it, degas below the new set point and turn the screw clockwise. With the buttstock removed, the hammer spring screw adds power clockwise and reduces it counterclockwise. Small turns make big changes, so go slowly and check as you go.

Every 250z includes two metal rotary magazines, a single-shot tray, a fill probe, spare O-rings and the user manual. Bundle versions add an H30 4-12x40 illuminated BDC scope and a set of 30mm scope rings. The .22 bundles also include two 250-count tins of Bowie hollow-tipped .22 pellets.

Yes. The Picatinny rail gives you a solid base for optics, and the barrel is threaded 1/2-20 UNF with a thread protector for suppressors and other muzzle devices (the Canada Compliant pages don't list a threaded barrel). Always check your local laws before you fit a suppressor.

A new 250z comes with a 1-year limited warranty. To activate it, register your purchase in the warranty section of barraairguns.com within 90 days. The warranty doesn't cover damage from modifications, abuse or skipped maintenance.